MZC is the backbone of your system. It is the central hub that does all the heavy lifting and is where your source components and individuals zones will be connected. t is possible to control the system entirely from a hand-held remote. If you want to avoid having any type of keypad on the wall, a small infrared receiver can be discreetly installed and the remote will act as a “virtual” keypad.
 
Doorbell and telephone triggers can be programmed to mute the system when the phone rings or someone is at the door. The audio then resumes after a pre-programmed time has elapsed. A video signal from a door camera can even be routed to the televisions throughout the home and the picture-in-picture function will let you see who is at the door without missing a moment of your movie.
 
The MZC can sense the audio or video signal from a particular source so it knows if an individual component is on or off. This is critical if a piece of equipment has been manually turned on or off. The next power on or off command from a keypad or remote will automatically establish the correct status of the sources in the system. As your system grows, the MZC allows you to add additional rooms or zones as it becomes necessary.  Multiple MZC units can be stacked for larger systems or additions to your home.
 
Since the system is software based, as new technologies become available, the operating system can be upgraded at both the software and firmware level. This avoids obsolescence and allows you to take advantage of the technological advancements that will be offered in the future.
 
Separate equalization (bass & treble) levels can be automatically designated for each zone to adjust for room size and acoustics. A pre-set volume level can also be programmed to make sure the audio is perfect every time that zone is activated.
 
Each zone can have its own individual command set and source limitations. For example, if you choose a particular CD player to be used exclusively in the master bedroom and the den, the system can be programmed to restrict access to that CD player from all other zones in the house.

6 Zone, 6 Source Controller/Amplifier

CTL13166: MZC-66 Shelf Top without Keypads
CTL13166EU: Europe
CTL13166NA: Australia
CTL13166-R: MZC-66 with Rack Mount without Keypads
30 Watts per Channel x 12 Channels (6 Stereo Zones)
UL, CE & C-Tick Certified
4 Ohm Stable per Channel 
Telephone and Doorbell Mute Capabilities
Can be Programmed with Discrete Power On/Off and other IR Codes for Any Component
Zone Expansion Capable
Includes IRE-3T IR Tester (Clear Head Talk-Back Emitter)
Dimensions: (H x W x D) 5 1⁄4″* x 17″ x 14 1⁄2″** (133 mm x 432 mm x 368 mm)
Weight: 23 lbs. (10.4 kg)
*  Add 1/2″ for feet (13 mm)
** Measurement does not include connectors. Please allow another 4″ for cable connections. (102 mm)

Place Your Bid Via Email NOW!

This entry was posted